Promotion %

beko Allcon 10 Konstruktionsklebstoff

more details

Content (volume)

Meesenburg Article Number:

Verkaufseinheit

New price:

The quantity you have chosen is in between 2 base units ()

Minimum quantity requirements for product are not fulfilled

Maximum quantity requirements for product are not fulfilled

Would you like to add:

Product advantages

Good dosability

Overpaintable and recoatable

Applicable indoors and outdoors

Product properties

Description

Witterungsbeständig gemäß DIN EN 204 D4, Prüfbericht liegt vor, verbindet nahezu alle Materialien, einkomponentig, einfache Handhabung, ohne Lösemittel, alterungsbeständig, gegen viele Chemikalien beständig, frostsicher, natursteinverträglich, GEV-EMICODE® EC 1Plus – sehr emissionsarm.

Elastic

Yes

Paintable

Yes

Waterproof

Yes

Ready for use

Yes

Base

Polyurethane

Consistency

pasty

Curing method

through drying/ evaporation

Type of adhesive

Construction adhesive

Features Adhesive

Adhesive gap max.

10 mm

Brand

BEKO

technical data

Curing time: approximately 3 mm of Allcon10 per 24 hours; for surface bonding, after 7 to 10 minutes; cured to about 70% - fully cured after 30 to 45 minutes
Base: polyurethane, moisture-curing
Density: approximately 1.4 g/cm³
Tested: test report according to DIN EN 204 D4 (water-resistant bonding), in accordance with WATT 91 (+80°C)
Scent: low odour
Shelf life: once opened, shelf life is approximately 10 months, unopened shelf life is about 1½ years
Skin formation time: approximately 3 minutes at normal climate (+23°C/ 50% relative humidity)
Storage: dry, at room temperature
Gap bridging: approximately 1.0 cm
Temperature resistance: from -40°C to +80°C (short-term up to +120°C)
Processable: from +5°C to a maximum of +40°C
Viscosity: pasty