Upat Injection Mortar UPM 33-300 Express

Upat Injektionsmörtel UPM 33 Express 300 ml Der preiswerte, zweikomponentige Injektionsmörtel UPM 33 auf Basis von Vinylester kann in Verbindung mit Gewindestangen (ASTA und UPM-A) bzw. Siebhülse (UPM

more details
Meesenburg Article Number: 0000401980
Manufacturer item no.: 520256
EAN: 4000657018379
Verkaufseinheit
x
Quantity:
=
measurement_units.standard.ST.name
Online availability
Location availability
Availability request and location information. Click & Collect is currently not available.
Prices only for Meesenburg customers

Product advantages

Secure anchoring: Approval ETA Concrete torn, ETA Masonry and fire protection testing
Attach near the edge
Efficiency in cavity wall construction: The sieve sleeve for use in cavity wall masonry bridges the plaster and minimises mortar consumption.
Product properties
Product properties

Description

Upat Injektionsmörtel UPM 33 Express 300 ml

Der preiswerte, zweikomponentige Injektionsmörtel UPM 33 auf Basis von Vinylester kann in Verbindung mit Gewindestangen (ASTA und UPM-A) bzw. Siebhülse (UPM-SH) und Gewindestange in nahezu allen Baustoffen zulassungskonform eingesetzt werden. Er kann in Vorsteck- oder Durchsteckmontage gesetzt werden und erreicht dabei ein hohes Lastniveau. Durch seine spezielle Zusammensetzung eignet sich der schnellaushärtende UPM 33 Express besonders für Anwendungen bei niedrigen Temperaturen und kann nach Zulassung bis -5 °C verwendet werden. Die 300 ml Kartusche eignet sich hervorragend für den unregelmäßigeren bzw. selteneren Bedarf und kann mit einer handelsüblichen Kartuschenpistole (z.B. Dichtstoffpistole etc.) ausgepresst werden.

Product properties
technical data
  • Approved for construction: Concrete, masonry, fire testing, hammer drilling
  • Suitable for: Hollow drilling, water-filled borehole
  • Load range concrete: Tensile load 3.4-150.1kN, Shear load 2.9-90.2kN
  • Load range masonry: Tensile load 0.54-3.43kN, Shear load 0.43-3.29kN
  • System component: Anchor rod ASTA/UPM-A, Internal thread anchor IST/UPM-I, Sleeve UPM-SH, Commercially available threaded rods with inspection certificate 3.1
  • Variant: Standard, Rapid-curing (Express)
  • Temperature in anchoring base: -15°C to +40°C
  • Variant: Cartridge size 360/300/150ml
  • Accessories: Metal dispensing gun UPM MR/Profi UPM DM P, Blower UPM AB, Cleaning brush UP BS

Link to the manufacturer's product page

  • Hazard statements
    H315: Causes skin irritation
    H317: May cause an allergic skin reaction
    H318: Causes serious eye damage
  • Precautionary statements
    P101: If medical advice is needed, have product container or label at hand
    P102: Keep out of reach of children
    P280: Wear protective gloves/protective clothing/eye protection/face protection
    P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
    P310: Immediately call a POISON CENTER/doctor


Material

Vinyl ester resin

Approval

ETA-15/0554

Brand
Upat

Manufacturer contact information

Upat Vertriebs GmbH
BebelstraĂźe 11
79108 Freiburg im Breisgau
Deutschland
Telefon: +49 76 66 90 22 80 0
Fax: +49 76 66 90 22 80 2
E-Mail: info@upat.de
chevron-leftAlertBrowse fileDownload fileFileImagePdfPdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerCalendarSort NoneSort ASCSort DESCReturn arrowVisibleVisibleHelmetSkrewWorker